Request a Quote

High Quality Swiss CNC Turning Service

AeroCNCParts offers precise Swiss CNC-tuned parts for critical aerospace applications. Using the latest Swiss-type lathe and following strict regulatory standards, we ensure the highest quality.

Explore Capabilities
Achieving Manufacturability

Swiss CNC Turning for High Precision Aerospace Parts

AeroCNCParts provides advanced Swiss CNC turning services tailored for aerospace components where unmatched accuracy is critical. With AS9100D and ISO 9001 certifications, we guarantee complete material traceability, FAI documentation, and rigorous CMM inspection for every order.

From NADCAP-approved finishes like hard anodising and passivation to detailed lot control, we deliver consistency, reliability, and full compliance for aerospace manufacturers.

  • PPAP support
  • Microscopic inspection
  • Complete documentation
  • Tolerances within +/-0.01mm to +/-0.005mm

Processing Capabilities

Capabilities of our Swiss CNC Turning

  • Precision Tolerances

    Achieve tight tolerances up to +/- 0.005mm, ensuring mission-critical aerospace components meet stringent dimensional accuracy requirements.

  • High Repeatability

    Delivers consistent results across large production runs with strict lot control, full traceability, and PPAP and FAI documentation support.

  • Surface Finishing

    Support in-house surface finishing such as hard anodising, alodine, and passivation to meet aerospace durability and corrosion resistance standards.

  • Quality Inspection

    Utilises CMM, 2.5D, and microscopic inspection processes to guarantee AS9100 compliance and defect-free aerospace parts delivery.

Capabilities

Dimensions And Tolerances

Here is the list of the parameters to check for our Swiss CNC Turning.

Request a Quote

Maximum Part

300mm x Ø32mm

Minimum Part

5mm x Ø0.08mm

Minimum Feature Size

Ø0.08mm

Standard Tolerances

+/- 0.013mm

Linear Dimension

+/- 0.013mm

Hole Diameters (not reamed)

Ø0.08mm – Ø10mm

Shaft Diameters

Ø0.08mm – Ø32mm

Applications

Where It Excels in Aerospace

  • Hydraulic Manifolds

    Critical components that regulate fluid flow in aerospace hydraulic systems require tight tolerance and flawless internal passages.

  • Fuel System Connectors

    Precision turned connectors ensure leak-proof and secure integration of aerospace fuel delivery systems under a high-pressure environment.

  • Actuation Pins and Shafts

    High-strength shafts and pins transmitting controlled motion within flight actuation systems, machined with NADCAP-approved finishing.

Featured Components

Aerospace Parts Gallery

See Full Product Gallery

  • Fuel Injector Nozzles

    Delivers micron-level precision and burr-free surfaces, ensuring consistent atomization and fuel efficiency in aerospace engines.

  • Hydraulic Valve Spools

    Tight-tolerance turning guarantees smooth fluid control and extended service life in demanding hydraulic systems.

  • Avionics Connector Pins

    Produces flawless concentricity and polished finishes, enabling reliable electrical signal transmission under extreme aerospace conditions.

  • Landing Gear Fasteners

    High-strength miniature threads produced with full traceability, supporting load-bearing reliability in critical landing assemblies.

  • Engine Sensor Housings

    Achieves exact concentric bores and fine finishes for accurate aerospace temperature and pressure sensing.

  • Actuator Pin

    Provides burr-free, tightly toleranced features that guarantee consistent performance in aerospace motion-control assemblies.

  • Satellite Connectors

    Deliver repeatable micro-features and superior surface finishes, ensuring dependable signal integrity in orbital applications.

  • Micro Screws

    Ultra-small threaded parts, produced with complete lot control and inspection, vital for aerospace instrumentation assemblies.

Performance

Why Choose AeroCNCParts for Swiss CNC Turning

AeroCNCParts combines technological Swiss CNC machines, expert engineers, and rigorous quality control to deliver AS9100-certified aerospace parts. We guarantee the highest precision and consistent performance for mission-critical applications.

Request a Quote
FAQs

Frequently Asked Questions

Get quick answers to common questions about Swiss CNC turning.

What tolerances can Swiss CNC turning achieve?
Swiss-type machines excel at micro-precision, routinely holding ±0.005 mm on diameters and ±0.003 mm on critical features thanks to guide-bushing stability.
What is your typical lead time for Swiss-turned components?
Standard turnaround is 5–10 working days, while urgent medical or aerospace parts can be completed in 48–72 hours depending on part size and material.
What quality standards do your Swiss turning processes follow?
All operations comply with ISO 9001 and AS9100, ensuring traceability, documented workflows, and adherence to strict aerospace specifications.
What materials and part sizes can you handle on Swiss machines?
We machine stainless steel, titanium, aluminum, copper alloys, and engineering plastics. Typical capacity ranges from Ø1 mm to Ø32 mm, ideal for small, high-precision components.
Do you provide surface treatments and inspection reports?
Yes. We offer passivation, electropolishing, anodizing, black oxide, and micro-deburred finishes. Parts can ship with FAI (AS9102), CMM reports, and full material/lot certifications.
Get Started

Request a Technical Review Today

Full material traceability, 100% inspection, AS9100-ready process

Upload Your Drawing for Instant DFM Advice
Drop files here
or